Automotive Cables to ISO, SAEJ, JASO D Automotive Cables. APPLICATIONS OVERVIEW. Standard wall automotive cables are ideal for use in. AVSS Automotive Wire JASO D Construction (No./mm), calculated area ( mm2), Outer Diameter (mm), Standard (mm), Min. (mm), Standard (mm), Max. AVSS Japanese Standard Automotive Cable Conductor:Cu-ETP1 bare according to JIS Insulation:PVC Standard Compliance:JASO D
|Published (Last):||8 August 2010|
|PDF File Size:||6.83 Mb|
|ePub File Size:||4.9 Mb|
|Price:||Free* [*Free Regsitration Required]|
The insulation shall not be fractured when the specified voltage is applied. Especially for the short-term aging test, heat load test, and heat resistance test that are under revision deliberation in ISOit is important to insist on the Japanese position to stwndard standard conformance.
Issues arising during study 2. The scrape abrasion test shall be conducted in accordance with the method specified in 5.
Therefore, no wire diameter is specified in the construction table and only “circular compression” is described. In addition, some nominal sizes include “f”, and the note “The symbol ‘f’ in the ‘Nominal size’ column means Explanatory notes 2 Standardd organization and integration of types and symbols require the understanding and cooperation of many relevant people, and a temporary increase in the types and symbols in These shall be organized and integrated at the next regular review of the 0.
Extremely thin wall halogen-free insulated low-voltage cables for automobiles CHFS: The situations are described below. Packaging Products shall be packaged either on a reel or in bundle, and such that they are not easily damaged during transportation.
The burning cable shall self extinguish within 15 seconds after exposure to shandard flame. The construction shall conform to the applicable standard in Tables 11 to 25 when the test is conducted according to Item 6.
AVSS Automotive Wire JASO D
Cable types, symbols, and insulation materials The cable types, symbols, and insulation materials are as shown in Table 1. Conductor Calculated Nominal Number of Approx. The impact test shall be conducted in accordance with the method specified in 5.
When marking is applied on the cable surface to identify the type and nominal size of a cable, it shall not be easily erasable. Minimum abrasion resistance shall be as specified in Table 9. Compressed conductor extremely thin wall halogen-free insulated low-voltage cables for automobiles CAVUS: The heat resistance A test shall be conducted in accordance with the method specified in 5.
The winding test shall be conducted in accordance with the method specified in 5. Product designation Product designation is based on the applicable standard name, type, nominal size, and colour, or by means of symbol, nominal size, and colour code.
Compressed conductor ultra thin wall halogen-free insulated low-voltage cables for automobiles EB: Thin wall low-voltage cables “type 1” for automobiles 0. For this reason, the current details are applied unchanged. In addition, indication of rated voltage is not specified in ISO Conductor Number of Calculated Nominal Approx.
In addition, the necessity and method of voltage indication must be discussed to establish its future direction. Among the heat resistance tests of the ISO standard, the short-term test and overload test were not adopted.
When the rate of outside diameter changer is measured after the specified test and subsequently the winding test in 6. The meanings of the symbols for cable types are as follows.
Another idea was proposed that the rated voltage should be indicated on the cable packaging for manufacturers that use the cables for electric devices in EVs and HEVs, but it was also not adopted because of the cost and time required for such indication.
Extremely thin wall type cross-linked polyethylene insulated heat resistant low-voltage cables for automobiles Note 2: Therefore, in this revision, standards for rated voltage of 25 VAC and 60 VDC are provided mainly for cables with thin insulation covering specified by JASO according to the international standard.
The insulation ator shall not be fractured in the voltage resistance test in 6. The conductor shall not be exposed in the winding test in 6.
Wire Cable, Jaso D611 Standards Avss Type Automotive Wire PVC Insulation, Wire Harness
stzndard The insulation shall neither crack nor melt after being heated. In addition, this standard does not specify indication of the rated voltage on the cable itself or packaging. Halogen-free insulated low-voltage cables for automobiles AVS: After study by the Electrical and Electronic Equipment Subcommittee and the Standardization Board, the revision was approved and determined at the standardization meeting in March The insulation shall not be fractured in the voltage resistance test in 6.